1996
Chevrolet Kodiak
Fully loaded, air ride, air seat,
white/grey interior
77k miles, 5speed/2speed rear end,
aluminum wheels, 11ft lounge, sleeps 4, toil/shwr/refer/micro,
new ac, storage below.
1998 42ft rebel trailer, 3/8k axles,
aluminum wheels, new tires, 7.5 onan, air compressor, stacker
with 10ft walls, engine hoist, elect. Rear door, lots of storage
with area over goose neck, int/ext. lites,
$75,000 OBO
Kip 408-358-8167
Used race car parts:
1
Franks clutch machine |
$
2,000 |
| 1 AFT 11”
pm clutch ( new hat) fresh 900lb/base
|
3,500 |
| 1 AFT 11” pm clutch
limited use fresh 900lb/base |
3,000 |
| 3 11” copper floaters
|
100e |
| 3 11” discs |
100e |
| 4 gates blower belts 1610-14m-75
(2new/2used) |
100e/50e |
| 1 40 tooth crank pulley
14mm |
100 |
| 2 31 tooth blwr pulley
14mm |
50e |
| 1 32 tooth blwr pulley
14mm |
50 |
| 2 cs1 44% gears |
500e |
| 1 set lenco shifters |
100 |
| 1 mcamis air
shifters 3spd |
150 |
| 2 crane cams hemi 296/296
|
100e |
| 1 ssi 5”
blower snout |
200 |
| 1 set radios
drvr/1crew less car antenna |
750 |
| 1 set fuel timers
4jet |
400 |
| 1 AFT fuel timer box (set
timers) |
300 |
| 1 Pertronix weather station
w/beeper for trlr |
200 |
| Kip 408-358-8167 |
|
More
photos
(Click on photo to enlarge)
|
 |
 |
 |
|
| Tim
McAmis Built C-5 Corvette, Top Sportsman Car
First Rate
Top Sportsman car, with all Pro quality components. Mark Williams
rear end and brakes, Strange struts, Lenco CS2 5 speed, Ram
double disc clutch, Davis radiator, Rock gelmat racing batteries
(2), Racepak computer, American double bead lock wheels, Stroud
chute, Goodyear tires, etc. Car has approximately 50 runs
on it. Stunning Dupont Chromallusion (color change) paint
which is a crowd pleaser at every race. Stock wheelbase, with
25.1E chrome moly chassis certified to May, 2009. Runs consistent
7.30s at 5500’ air with 572 BBC, with one nitrous system.
Capable of mid 6 second runs with big motor and/or more nitrous.
Extras included (new pair Goodyear slicks, Rock battery charger,
Ram clutch weight kit, 2 additional Lenco gear sets and tools,
etc.) Asking $67,500 complete, or $47,500 as a roller, or
best offer. Will consider delivery within reason. Call Don
at (406) 360-1071.
|
|
